1*100Base-Fx to 8*RJ45 Fiber Media Converter Single Mode 20km SC 10/100Mbps Ethernet Converter DC12V

Product Description

Fiber Media Converter Header
Product Design
Product Design Aspect 1
Product Design Aspect 2

1 fiber port with 8*10/100Mbps RJ45 port

Point-to-multipoint high-speed forwarding
Fiber Port Architecture

Plug-and-play, no need for any configuration

Plug and Play Details

Product dimensions and interface definitions

Dimensions and Interface Layout

Application

Application Topologies
Specification
Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Interface • 1*155Mbps SC optical fiber interface
• 8*RJ45 10/100Mbps
Distance • 100m @ Cat5e
• 20km @ SMF
Wavelength • A: Tx1310nm/Rx1550nm
• B: Tx1550nm/Rx1310nm
Transmission media • Cable: Cat5e or higher UTP and STP
• Optical Fiber: 9/125μm single-mode optical fiber
Optical parameter • Average emission power: -9 to -3 dBm
• Receiving sensitivity: -22 dBm
Power DC 5V/2A
Size 195mm * 92mm * 28mm
Environment • Operating temperature: -5°C to 60°C
• Operating humidity: 10% to 90% RH (non-condensing)
• Storage temperature: -40°C to 70°C
• Storage humidity: 5% to 90% RH (non-condensing)
Order Info
Model Code Description
RD-FE108-T Fiber Media Converter 10/100MB 1*SC + 8*RJ45 (1310-TX)
RD-FE108-R Fiber Media Converter 10/100MB 1*SC + 8*RJ45 (1550-TX)
This product is set by default to have a fiber transmission distance of 20 kilometers. However, you can also request customized options based on the actual distance required for your deployment.
Frequently Asked Questions
What are the primary interfaces available on this fiber media converter?
This converter features 1 SC optical fiber port (155Mbps) and 8 RJ45 ports supporting 10/100Mbps Ethernet speeds.
Does this device require any complex installation setup?
No, it is a plug-and-play device. No software installation or network configuration is required to begin using it.
Can the default transmission distance of 20 kilometers be customized?
Yes, while the default transmission distance is set to 20km over single-mode fiber (SMF), configurations can be adjusted based on the specific distance parameters required by your network layout.
How does WDM (Bi-Directional) transmission work with this model?
The device works in complementary pairs. The RD-FE108-T model transmits signals at 1310nm and receives at 1550nm, whereas the RD-FE108-R model transmits at 1550nm and receives at 1310nm.
What are the recommended environmental conditions for operation?
The operating temperature range is -5°C to 60°C, and the supported operating humidity is 10% to 90% RH (non-condensing).
What power source does the media converter require?
The converter runs on a standard DC 5V/2A external power supply, which is included in the package.

Related Products